112
9–2a: Ctrl Ch [Ch01...16, Gch]
Specify the MIDI channel that will control dynamic
modulation (Dmod) for the master effects. With a set-
ting of Gch, the global MIDI channel “MIDI Channel”
(Global P1: 1–1a) will be used for control.
9–4: Master EQ
The master EQ is a three-band stereo EQ. It is located imme-
diately before the L/R bus is sent from the AUDIO OUTPUT
(MAIN OUT) L/MONO and R, and is used to apply overall
equalization (tonal adjustments) (
☞p.207).
9–4a: Ctrl Ch [Ch01...16, Gch]
Specify the MIDI channel that will control dynamic
modulation (Dmod) for the master EQ. With a setting of
Gch, the global MIDI channel “MIDI Channel” (Global
P1: 1–1a) will be used for control.
9–4a
To Next Page
Loading...
Need help?
General
