122
▼ 3–1: Page Menu Command
3–1A: Copy Scale
This command copies data from a preset scale or between
user scales. For details on the preset scales, refer to “Type”
(Program P1: 1–1c).
1 Select this command to open the following dialog box.
2 In “From,” select the copy source scale. In the pull-down
menu beside it, select the Key. The Key selection will be
valid only if Pure Major or Pure Minor is selected.
Stretch can be copied when the destination “To” is the
User All Notes Scale.
3 In “To,” selects the copy destination scale.
4 To execute the Copy Scale command, press the OK but-
ton. To cancel, press the Cancel button.
4–1: Program Cat.
4–2: Comb Cat.
Here you can assign names to program and combination
categories. When you select the text edit button for a cate-
gory name, a dialog box will appear so that you can rename
the category. Up to sixteen characters can be input. Sixteen
categories can be named.
A category name you edit here can be selected when you
write a program or combination.
In Program, Combination, Sequencer, or Song Play modes,
you can select programs by category in the (category) popup
menu. In Combination mode, you can select programs or
combinations from the (category) popup menu.
With the factory settings, the categories are named for types
of musical instrument.
If you want the edited user categories to be backed up
when the power is turned off, you must write them into
memory. Select the “Write Global Setting” page menu
command to access the Write Global Setting dialog box,
or press the [REC/WRITE] key to display the Update
Global settings dialog box and press the OK button to
write the edited settings.
0–1A
3–1A
Global P4: Category Name
0–1A
0–1A
To Next Page
Loading...
Need help?
General
