44
9–2a: Ctrl Ch [Ch01...16, Gch]
This parameter specifies the MIDI channel that will
control dynamic modulation (Dmod) for the master
effect. With a setting of Gch, the global MIDI channel
“MIDI Channel” (Global P1: 1–1a) will be used for con-
trol. Normally you will set this to Gch.
9–4: Master EQ
The master EQ is a three-band stereo EQ. It is located imme-
diately before the AUDIO OUTPUT (MAIN OUT) L/
MONO and R from the L/R bus, and adjusts the overall
tonal character of the sound (
☞p.207).
9–4a: Ctrl Ch [Ch01...16, Gch]
This parameter specifies the MIDI channel that will
control dynamic modulation (Dmod) for the master EQ.
With a setting of Gch, the global MIDI channel “MIDI
Channel” (Global P1: 1–1a) will be used for control.
Normally you will set this to Gch.
0–1A
9–4a
To Next Page
Loading...
Need help?
General
