Program
P0
P1 P2 P3 P4 P5 P7 P8 P9
23
P00–P04 are preset arpeggio patterns, U00 (A/B)–U231 (D)
are user arpeggio patterns. User arpeggio patterns can be
created in Global P6.
Arpeggio patterns U000 (A/B)–U231 (D) can be selected
using the numeric keys [0]–[9] and the [ENTER] key.
Octave [1, 2, 3, 4]
Specify the number of octaves in which the arpeggio will be
played (Link: “Octave” 0–2a).
If a user arpeggio pattern is selected, the range of the
arpeggio will depend on the “Octave Motion” (Global
P6: 6–1b) setting.
Resolution [ , , , , , ]
Specify the timing resolution of the arpeggio. The notes of
the arpeggio will be played at the interval you specify: ,
, , , , or . The speed of the arpeggio pattern is
determined by the “Arpeggiator Tempo ” and the “Resolu-
tion” (Link: “Reso” 0–2a).
Gate [000...100(%), Step]
Specify the length (gate time) of each note in the arpeggio.
000–100(%): Each note will be played with the specified gate
time.
Step: This is available when an user arpeggio pattern U00
(A/B)–U231 (D) is selected for “Pattern.” When this is
selected, the gate time specified for each step will be used.
The gate time can also be controlled by the front panel
ARPEGGIATOR [GATE] knob. Rotating the knob toward
the left will shorten the gate time, and rotating it toward the
right will lengthen the gate time. When the knob is at the 12
o’clock position, the gate time will be as specified here.
Velocity [001...127, Key, Step]
Specify the velocity of the notes in the arpeggio.
001–127: Each note will sound with the specified velocity
value.
Key: Each note will sound with the velocity value at which
it was actually played.
Step: This is available when an user arpeggio pattern U00
(A/B)–U231 (D) is selected for “Pattern.” When this is
selected, the velocity specified for each step will be used.
The velocity can also be controlled by the front panel
ARPEGGIATOR [VELOCITY] knob. Rotating the knob
toward the left will decrease the velocity, and rotating it
toward the right will increase the velocity. When the knob is
at the 12 o’clock position, the velocity will be as specified
here.
Swing [–100...+100(%)]
This parameter shifts the timing of the odd-numbered notes
of the arpeggio.
Sort
This specifies the order in which the notes you press will be
arpeggiated (Link: “Sort” 0–2a).
Checked: Notes will be arpeggiated in the order of their
pitch, regardless of the order in which you pressed them.
Unchecked: Notes will be arpeggiated in the order in which
you pressed them.
Latch
Specify whether or not the arpeggio will continue playing
after you take your hand off of the keyboard (Link: “Latch”
0–2a).
Checked: The arpeggio will continue playing after you
remove your hand from the keyboard.
Unchecked: The arpeggio will stop when you remove your
hand from the keyboard.
Key Sync. (Keyboard Synchronize)
Specify whether the arpeggio pattern will begin when you
press a key, or whether it will always follow the “Arpeggia-
tor Tempo ” (Link: “Key Sync.” 0–2a).
Checked: The arpeggio pattern will start playing from the
beginning when a note-on occurs from a condition where no
keys are pressed. This setting is suitable when you are play-
ing in realtime and want the arpeggio to play from the
beginning of the measure.
Unchecked: The arpeggio pattern will always play accord-
ing to the “Arpeggiator Tempo .”
Keyboard
This specifies whether the notes you play on the keyboard
will be sounded as usual in addition to being sounded as
part of the arpeggio (Link: “Keyboard” 0–2a).
Checked: The notes you play will be sounded on their own,
in addition to being sounded as part of the arpeggio. For
example if you simultaneously press two or more notes,
they will be sounded as usual in addition to being played as
arpeggiated notes.
Unchecked: Only the arpeggiated notes will be heard.
▼ 7–1: Page Menu Command
7–1A: Copy Arpeggiator
This command copies arpeggio settings.
1 Select this command to open the following dialog box.
2 In “From” specify the copy source arpeggio settings
(mode, bank, number).
3 If you are copying from Combination, Song, or Song Play
mode, specify whether you wish to copy from A or B.
4 To execute the Copy Arpeggio operation, press the OK
button. To cancel, press the Cancel button.
P04: RANDOM (Preset Arpeggio Pattern)
U00 (A/B)...U199 (A/B) (for User Arpeggio Pattern)
U200 (C)...U215 (C) (for EXB-PCM series, User Arpeggio Pattern)
U216 (D)...U231 (D) (for EXB-PCM series, User Arpeggio Pattern)
When Resolution =
Step
123456789
Swing
–50 –25 +25 +25
0–1A
7–1A
To Next Page
Loading...
Need help?
General
