DVR Settings
Selecting & Configuring Record Triggers
Flashback3 & Flashback HD User’s Guide
L3 Mobile-Vision 6.23.2017 Page 103
17 P
ress to change the value of the AUX 2 Stop field from ON to OFF.
18 Press four times to save your changes and exit this option. End of procedure.
19 Examine the value of the AUX 2 Stop field:
If the value of the AUX 2 Stop field is ON, press to advance to the AUX 2
Delay field. Next, skip to step 24.
If the value of the AUX 2 Stop field is OFF, press twice to advance to the
AUX 2 Stop field.
20 P
ress to select the AUX 2 Stop field.
To Next Page
Loading...
