LSIS sv-ip5a User Manual

Chapter 6 - Parameter Description [FU1]
6-13
FU1-23: Stop Mode
Sets the stopping method for the inverter.
Setting Range Description
Decel
Inverter stops by the deceleration
pattern.
Dc-brake
Inverter stops with DC injection
b
raking. Inverter outputs DC voltage
when the frequency reached the DC
injection braking frequency during
decelerating.
Free-run
(Coast to stop)
Inverter cuts off its output
immediately when the stop signal is
commanded.
Flux brake
Fast stop is available by converting
the regenerating energy into heat at
the motor.
☞ Caution: Motor may be overheated due to
frequent use of Flux Brake function.
[Stop Mode: ‘Decel’]
[Stop mode: Free-run]
FU1 ► S top mode
23 Decel
0 23
Factory Default: Decel 0
Output Frequency
Time
FX-CM
ON
Output Voltage
Time
Time
Stop Command
Output Frequency
Time
FX-CM
ON
Output Voltage
Time
Time
Stop Command

LSIS sv-ip5a Specifications

General

Brand	LSIS
Model	sv-ip5a
Category	Controller
Language	English