Manitowoc MLC650 - Page 172

SET-UP AND INSTALLATION MLC650 OPERATOR MANUAL
4-36
Published 08-12-19, Control # 224-13_v2
Item Description
1 Rotating Bed
2 Hydraulic Connections
FIGURE 4-28
FIGURE 4-29
Item Description
1 Hand-Held Pin Puller
2 Insert Coupler
3 Cylinder Rod End
4 Control Knob
4a Pull to Extend
4b Push to Retract
5 Control Knob
5a Right to Extend
5b Left to Retract
PAST
CURRENT
FIGURE 4-30
Item Description
1 Pin Puller Cage (past boom hinge and Drum 4 pins)
2 Pin Puller Cage (gantry and backhitch pins)
3 Shoulder Screw
4 Pin Puller Cage (current boom hinge and Drum 4 pins)
5a Boom Hinge Pin (current)
5b Drum 4 Pin (current)
6 Alignment Lug (8)
7 Quick-Release Pin (4)
8 Keeper Plate (4)