Manitowoc MLC650 User Manual

Manitowoc Published 08-12-19, Control # 224-13_v2 4-5
MLC650 OPERATOR MANUAL SET-UP AND INSTALLATION
4
CRANE ASSEMBLY COMPONENTS
The MLC650 crane can be equipped with the following self-
erect components, as shown in Figure 4-5
.
• Self-erect cylinder (3) for lifting major parts. The cylinder
is attached to the top of the live mast (1).
• Shackles (5) which attach to the cylinder rod end (4)
(various sizes, see Figure 4-7 on page 4-6
for a list of
shackles)
• Synthetic slings (various sizes, see Figure 4-7 on
page 4-6 for a list of slings)
• Rotating bed jacking cylinders (12) with outrigger pads
(11) for lifting the crane onto and off of trailer
• Carbody jacking cylinders (9) for removing and installing
crawlers.
• Hydraulically actuated pins (not shown) for connecting
and disconnecting the crawlers to and from the carbody
• Hydraulically actuated mast-assist cylinders (17) for
assisting the mast to the operating position and to the
transport position
• Hand-held cylinder used to connect the boom butt to the
adapter frame
• Remote control for operating the above components
(see Figure 4-12
)
• Pins (installed and removed using hydraulics, not
shown) for connecting and disconnecting the rotating
bed to the adapter frame
An assist crane will be required for handling and installing
the following components:
• Installation of the live mast to the rotating bed
• Counterweight tray and counterweights
PARTS BOX
Manitowoc provides a parts box (Figure 4-6).
The following types of parts are shipped in the parts boxes:
• 1 - link assembly dead end
• 10 - Shackles (various sizes, see Figure 4-7 on page 4-
6)
• 14 - Lifting slings (various sizes, see Figure 4-7 on
page 4-6)
• 2 - hand-held pin pullers
• 2 - hydraulic hoses
• 2 - pin puller cage weldments
• 2 - pin puller boom butt cage weldments
• 1 - quick drain valve assembly
• 1 - crawler tensioning pump
• 2 - open end wrenches (Stucchi - 16, 20, and 24) or a
strap wrench
Thoroughly inventory the parts box according to the packing
diagrams under the parts box cover.
FIGURE 4-6

Manitowoc MLC650 Specifications

General

Brand	Manitowoc
Model	MLC650
Category	Construction Equipment
Language	English