Original product manual
Copyrights
© 2019 Metronix Meßgeräte und Elektronik GmbH. All rights reserved.
The information and data in this document have been composed to the best of our
knowledge. However, deviations between the document and the product cannot be
excluded entirely. For the devices and the corresponding software in the version handed
out to the customer, Metronix guarantees the contractual use in accordance with the user
documentation. In the case of serious deviations from the user documentation, Metronix
has the right and the obligation to repair, unless it would involve an unreasonable effort. A
possible liability does not include deficiencies caused by deviations from the operating
conditions intended for the device and described in the user documentation.
Metronix does not guarantee that the products meet the buyer’s demands and purposes
or that they work together with other products selected by the buyer. Metronix does not
assume any liability for damage resulting from the combined use of its products with other
products or resulting from improper handling of machines or systems.
Metronix reserves the right to modify, amend or improve the document or the product
without prior notification.
This document may, neither entirely nor in part, be reproduced, translated into any other
natural or machine-readable language nor transferred to electronic, mechanical, optical or
any other kind of data media, without the express authorisation of the author.
Trademarks
Any product names in this document may be registered trademarks. The sole purpose of
any trademarks in this document is the identification of the corresponding products.
EtherCAT® is a registered trademark and patented technology, licensed by Beckhoff
Automation GmbH, Germany.
MetronixServoCommander
®
is a registered trademark of Metronix Meßgeräte und
Elektronik GmbH.
Product manual BL 4000-C Page 2 of 298
To Next Page
Loading...
Need help?
General
