Metronix smartServo BL 4104-C User Manual

Table of Contents
Table of Contents
1 About this Product manual 13
1.1 Explanations and notation 13
1.1.1 Structure of the warning notes 13
1.1.2 Notation in this product manual 14
1.2 Additional documents 14
1.3 Order numbers 14
1.4 Applicable standards 15
2 For your own safety 16
2.1 General information 16
2.2 Intended use 17
2.3 Target group 17
2.4 General safety instructions 18
2.5 Personal protective equipment 19
2.6 Safety notes for installation and maintenance 19
2.7 Protection against contact with electrical parts 21
2.8 Protection against electric shock by way of protective extra-low voltage (PELV) 22
2.9 Protection against dangerous movements 22
2.10 Protection against contact with hot parts 23
2.11 Protection during the handling and installation of the devices 23
3 Product description 24
3.1 Type designation 24
3.2 Device view 25
3.3 Features 27
4 Quick-start guide 30
4.1 Using the parameterisation program 32
4.1.1 The user interface 32
4.1.2 Setting up the communication 33
4.1.2.1 Communication via USB 33
Product manual BL 4000-C Page 4 of 298

Metronix smartServo BL 4104-C Specifications

General

Brand	Metronix
Model	smartServo BL 4104-C
Category	Servo Drives
Language	English