3 Product description
3 Product description
The servo drives of the smartServo BL4100-C series are smart AC servo drives for
controlling three-phase synchronous motors, torque motors and linear motors. The servo
drives can be used in a universal manner, since they can be combined with a wide range
of encoder systems and motors. Due to their extensive parameterisation options, they can
be adapted to a variety of different applications.
The connection to a superordinate control system can be realised by way of the integrated
EtherCAT/Profinet or CAN interface.
Parameter sets that have been created for the ARS 2000 FS series can be used for the
BL4100-C series and vice versa.
3.1 Type designation
Type key example (BL4100-C product family)
Figure 1: Nomenclature
Pos. Description
1 Type designation: Basic Line
2 4th Metronix servo drive product family
3 Mains power connection: 1 = single-phase / 3 = three-phase
4 Nominal current in [A eff]
5 Cabinet (control cabinet device)
Product manual BL 4000-C Page 24 of 298
To Next Page
Loading...
Need help?
General
