Midas HD96-24-CC-TP

80 HD96-24-CC-TP User Manual
Tip: The Groups workow is a great way of colouring multiple channels at once to increase workow set-up speed (details later in this chapter). The Manchino
workow also enables name inputting and easy manipulation of the same control across multiple channels. Groups of either inputs or outputs can be edited all at once
and is a very powerful way to make global changes in one operation.
Another way to name a channel is to navigate to any of the workows found in the top bar menu. There are several ways to navigate to the dierent channel, auxes,
matrices or masters by touching on the associated navigation blocks.
Note: To name a VCA or POP group use the Groups workow.
In the Home workow you will nd input navigation in the top left widget and output selection can be found in the top right of the widget. To name inputs:
1. Touch the block named IN 1-8. This brings channels 1-16 on to the GUI fader/overview area.
2. Press the Image or icon on channel 1 in the GUI or press the SEL button of the corresponding path on the surface.
3. On the far-right side of the touch screen is the channel detail area, pressing the name in this area will open up the Channel List Naming Page. Channels can also be
named by touching the name in the widget area.
4. Touching the icon will open the image change page.
5. Touching in the tags are will take you to the channel tags page.