Motorola APEX1000 User Manual

B
Configuring for Switched Digital Video • Step by Step Instructions
APEX1000 All-Purpose Edge QAM Software Version 2.4.x • Installation and Operation Manual
175
573408-001-a
The GigE Configuration window displays:
To configure the GigE interface:
1. Enable the GigE ports to be used on the APEX1000.
Note: GigE1 and GigE2 are paired, and GigE3 and GigE4 are paired together.
2. Configure the IP address and the Subnet Mask for each enabled port.
3. Configure the Default Gateway for the enabled port pair.
4. Click Apply to incorporate these changes in the APEX1000.

Motorola APEX1000 Specifications

General

Brand	Motorola
Model	APEX1000
Category	Switch
Language	English