Moxy MT 31 - Page 403

SHOP MANUAL MT26/31 - 08.2006 SHOP MANUAL MT26/31 - 08.2006
SHOP MANUAL MT26/31 - 08.2006 SHOP MANUAL MT26/31 - 08.2006
TRANSMISSION
Ch 2 page 206 Ch 2 page 207
TRANSMISSION
TRANSMISSION
Ch 2 page 206 Ch 2 page 207
TRANSMISSION
Figure 288
Figure 291
Figure 290
Figure 289
Pre-assemble and install spur gear KR (Figure 288 ... 296):
The figure on the left shows the components of the spur gear KR.
1 = Bearing inner race
2 = Shims , s = 3,0 and s = 3,10 mm
( Σ = 6,10 mm/empirical value)
3 = Spur gear
4 = Bearing inner race
Mount bearing inner race
Introduce shims (2 units / s = 3,0 and s = 3,10 mm) .
Check axial gap – spur gear support 0,0 ... 0,05 mm!
Place spur gear over the bearing inner race.
(S)
1
3
4
2