Muratec F-525 User Manual

3-16
Machine Parameter 108
Switch
Initial
Setting
Adjust Usage/Comments
7 0 Printer registration
adjustment (Horizontal) for
duplex printing cassette.
Adjusts the start point to
print.
The plus setting increases
the left margin and the minus
setting decreases it.
The setting changes by
16 dots (0.6773 mm).
See table on page 3-21.
Note: Set this switch after setting the margin to
“0 mm” in Unique Switch 52. Then, after setting
this switch, set the margin to the initial setting (4
mm) in Unique Switch 52.
6 0
5 0
4 0
3 0
2 1
1 1
0 1
Machine Parameter 109 ~ 139 — Factory use only

Muratec F-525 Specifications

General

Brand	Muratec
Model	F-525
Category	All in One Printer
Language	English