4-10
Message on the display Description / Solution
Invalid characters have been entered. You entered invalid characters. To register a Shortcut, insert the
PC name between “//” and “/”. To register a File Name, special
characters such as “\”, “/”, “:”, “*”, “?”, “<”, “>” or “|” cannot be
entered. To register NetBIOS characters other than the alphabet
and numbers between 1 to 9.
Invalid I.D.code The F-code box I.D. code you entered is not valid. Try re-entering
your F-code box I.D. code.
Invalid number! You entered a number which is not valid for the current operation.
Invalid Paper Size The selected paper is not suitable for duplex printing. Select other
paper source. Select plain paper in the regular size.
Invalid parameters! You entered an invalid value or pressed [Enter] without entering a
value.
– or –
The advanced search failed due to an internal machine error.
Check the LDAP server setting, and try the search again. For more
information about LDAP server set up, refer to the MFP User’s
Guide or PC User’s Guide.
Jam Recover.
Set the document. Press [Start].
From Page :
[Start] [Cancel]
You selected to continue the job. The machine is instructing you
from which page to set the document. Set the document again from
that page that the machine is indicating you and press <Start>. To
cancel and finish the job, press [Cancel].
Lamp error. Call for service. The scanner lamp is dim or not operating.
Make repeated copies to help evaporate any internal moisture. If
that doesn’t resolve the problem, replace the lamp.
LDAP reference execution error The advanced search failed due to an internal machine error. Try
the search again.
Link Path is required. You tried to register a shortcut without entering [Link]. To register a
Folder or FTP server shortcut, you should enter the [Link].
Load XXX paper Load the paper specified by the machine.
Load paper There is no paper either in the cassette or in the bypass tray. Load
paper.
Load paper for reception The paper run out during fax reception. Load paper.
Load paper in the bypass tray There is no paper either in the cassette or in the bypass tray. Load
paper.
Load paper into the XXX cassette There is no paper in the XXX cassette. Load paper in it.
Macro in use You cannot press [Macro Program] while you are registering a
Macro.
Mail transmission error The transmission failed. Check the printed out “Check Massage” to
identify the error.
Memory full. Printing will resume
when mem. is free.Press [OnLine] to
stop.
There is not enough memory to store the print job. Wait until some
reserved jobs are finished and the memory becomes free.
Memory overflow Rx Memory has overflowed during the fax reception.
Press <Stop> to return the standby screen.
Memory overflow. You tried to enter more pages into memory than your machine
could store.
Memory overflow. Number of stored
page: Store these pages?
[Yes] [No]
You tried to store more pages into memory than your machine
could store. Press [Yes] to keep the scanned pages in memory,
or press [No] to delete all pages stored during this operation. The
display shows how many pages are stored.
Name is required You need to enter a name for the registration.
No command stored You pressed <Fax Cancel/Job Confirm.> to review upcoming
commands, but your machine has no command stored.
No document stored You tried to print a document from memory, but your machine has
no documents in storage.
No Drum Cartridge The drum cartridge is missing or has not been properly installed in
your machine. Please properly install the drum cartridge.
To Next Page
Loading...
Need help?
General
