LAN Configuration
107
NETGEAR ProSAFE VPN Firewall FVS318G v2
The following table provides an overview of how information is obtained in the DMZ when you
configure a stateless DHCPv6 server and the RADVD:
When the Managed flag is set in the RADVD, the DHCPv6 server can assign IP a
ddresses,
and the RADVD also assigns IP addresses in the sense that it provides information that
allows IPv6 clients to configure their own IPv6 address.
When the Other flag is set, the DHCPv6 server does not assign IP addresses but pro
vides
DNS server and other configuration information only.
To configure the Router Advertisement Daemon for the DMZ:
1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter
https://192.168.1.1.
The NETGEAR Configuration Manager Login screen d
isplays.
b. In the Username
field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
c. Click
the Logi
n button.
The Router Status screen displays. After five minutes of inactivity
, which is the default
login time-out, you are automatically logged out.
2. Select Network
Con
figuration > DMZ Setup.
The DMZ Setup screen displays.
3. Select the IP
v6 radio button.
The DMZ Setup screen displays the IPv6 settings.
4. Click the RA
DVD option arrow.
5. Enter the settings as described in the following table:
Table 21. DHCPv6 and RADVD interaction in the DMZ
Flags in the RADVD DHCPv6 Server Provides RADVD Provides
Managed RA flag is set.
• IP address assignment
• DNS server and other configuration
information
• IP address assignment
• Prefix
• Prefix length
• Gateway address
Other RA fla
g is set. DNS server and other configuration information • IP address assignment
• Prefix
• Prefix
length
• Gateway address
To Next Page
Loading...
Need help?
General
Weight and Dimensions
