NETGEAR FVS318G - Page 365

Monitor System Access and Performance
365
NETGEAR ProSAFE VPN Firewall FVS318G v2
To change the poll interval period, enter a new value (in seconds) in the Poll Interval field,
and click the Set interval button.
To stop polling, click the St
o
p button.
Detailed Status
 To view the status details:
1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter
https://192.168.1.1.
The NETGEAR Configuration Manager Login screen d
isplays.
b. In the Username
field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
c. Click
the Logi
n button.
The Router Status screen displays. After five minutes of inactivity
, which is the default
login time-out, you are automatically logged out.
Tx B/s The number of bytes transmitted per second on the port.
Rx B/s The number of bytes received per second on the port.
Up Time The period that the port is active since it was restarted.
Table 81. Router Statistics screen information (continued)
Item Description