Omron ZW Series - Page 187

Chapter 5 Ethernet/RS-232C COMMUNICATION
Chapter 5
Connecting Using RS-232C Cable
5-11
ZW
User’s Manual
■ Setting the delimiter
Set the delimiter for RS-232C communication.
Operating procedure
Setting [Display] Description
CR [CR]
(default value)
delimiter: CR
LF [LF] delimiter: LF
CR+LF [CRLF] delimiter: CR+LF
Steps Key operation Display Description
1 - 3 For moving to COM, see steps 1 to 3 in p.5-6
4 Press or keys to select either of "DATA" and
press key.
5 Select the delimiter.
The current setting value is displayed on the sub-
display.
Press / keys to enter the editing mode, and the
sub-display blinks.
Select the delimiter and press key.
6 Press key for two seconds to enter the RUN
mode.
ZERORST/ZERORST/
ESCESC
ZERO/ZERO/
SETSET
ZERO/
ZERO/
SET
SET
ZERORST/
ZERORST/
ESC
ESC
ZERO/
ZERO/
SET
SET
ZERO/ZERO/
SETSET
RUNRUN
FUNFUN
TEACHTEACH
L
H L RUNRUN
LIT
RUN
RUN
FUN
FUN
TEACH
TEACH
L