Omron ZW Series - Page 193

Chapter 5 Ethernet/RS-232C COMMUNICATION
Chapter 5
Connecting Using RS-232C Cable
5-17
ZW
User’s Manual
■ Processing unit data acquisition command <DG command>
Acquire the measurement data and setting data of the processing unit.
<Command format>
<Response format>
• Normal processing
• When a command was not successfully processed
<Parameter explanation>
For unit numbers and data numbers, refer to "Processing Item Data List" (p.7-13)
Parameter Details
Unit number Specifies the unit number (0 to 255) to be acquired.
Data number Specifies the data number (0 to 255) to be acquired.
DG CR
㸡
Unit number
㸡
Data number
㸡
Space
㸡
Space
CR
㸡
Setting value (N letter)
ERCR