Panasonic GM1 - Setting up the Communication Function; Adding a Protocol to be Used for the LAN Port

5.5 Setting up the Communication Function
5.5.1 Adding a Protocol to Be Used for the LAN Port
This section explains how to add an object of the protocol to be used for the LAN port to a
project and set it up.
For example, use the following procedure to add an object of Modbus TCP to LANPort1 and set
it up.
1. Right-click the
[LANPort1] object in the navigator pane and then select "Add Device" from
the context-sensitive menu that is displayed.
The "Add Device" dialog box will be displayed.
2. Select device "Modbus TCP Master".
5.5 Setting up the Communication Function
WUME-GM1RTXOP-01 5-19