Panasonic GM1 - Inserting Elements from Toolbar

7.3.3 Inserting Elements from Toolbar
For example, step elements and transition elements can be inserted from the toolbar, as below.
1. Select the TRUE transition element in the implementation section.
The selected transition element will turn red.
2. Click the icon ("Insert Step-transition After") on the toolbar.
"Step0" step element and "T
rans0" transition element will be inserted below the TRUE
element.
3. Select the "T
rans0" transition element and click the
icon ("Insert Step-transition") on the
toolbar
.
"Step1" step element and "Trans1" transition element will be inserted above the "Trans0"
transition element.
7.3 Programming in Sequential Function Chart (SFC)
7-22 WUME-GM1RTXOP-01