Panasonic GM1 - RTEX Axis Settings and Configuration

11.1 RTEX Axis Setting
11.1.1 Overview of RTEX Axis Setting
To use the motion function, you must configure axis settings for RTEX.
This section explains how to set axis information for R
TEX in GM Programmer.
● For details on how to set up RTEX and add axes, refer to "5.3 Setting up Motion Control
".
11.1.2 Basic Settings of the RTEX Axis
● Be sure to set the RTEX axis,
1. Double-click the servo amplifier object in the navigator pane.
2. From the displayed menu, select
"Edit Object".
The "RTEX Axis Setting" dialog box will be displayed.
General Settings
Select the "General" tab and set the following items.
11.1 RTEX Axis Setting
WUME-GM1RTXOP-01 11-3