Panasonic GM1 - Modbus-RTU Slave Communication

13.3.5 Modbus-RTU Slave Communication
This section explains how to use the Modbus-RTU slave function.
The slave function is used by setting up the device object.
1. Right-click the
"Device" object in the navigator pane and then select Add Device from the
context-sensitive menu that is displayed.
The "Add Device" dialog box will be displayed.
2. Select "Modbus COM
" under "Modbus Serial Port" and click the [Add Device] button.
The "Modbus_COM" object will be added to the "Device" object.
3. Right-click the
"Modbus_COM" object in the navigator pane and then select Add Device
from the context-sensitive menu that is displayed.
The "Add Device" dialog box will be displayed.
13.3 MODBUS
13-38 WUME-GM1RTXOP-01