7.7 Program Creation Support Functions
This section explains the program creation support functions used to create programs.
7.7.1 Bookmark
The bookmark function allows the cursor to move to bookmarked locations.
The bookmark function can be used in all programs other than SFC programs.
This section explains the procedures for setting bookmarks and moving the cursor between
bookmarks, using an LD program as an example.
1. Select the network (circuit) where you want to set a bookmark. From the menu bar
, select
Edit>Bookmarks>Toggle Bookmark, or click the <Ctrl> key + <F12> key simultaneously.
A bookmark (
) will be set in the selected network (circuit).
Performing the above operation again clears (deletes) the set bookmark.
2. T
o move to the next bookmark, press the <F12> key. To move to the previous bookmark,
press the <Shift> key + <F12> key simultaneously.
● To clear (delete) all the set bookmarks, from the menu bar, select Edit>Bookmarks>Clear All
Bookmarks.
●
You can also perform bookmark operations by clicking appropriate icons on the toolbar.
No. Item
(1) Toggle Bookmark
(2) Previous Bookmark
(3) Next Bookmark
(4) Clear All Bookmarks
7.7.2 Call Tree View
Opening the Call Tree view enables the user to search the callers and callees of blocks such as
functions, function blocks, or POU.
7.7 Program Creation Support Functions
7-44 WUME-GM1RTXOP-01
To Next Page
Loading...
