Panasonic GM1

● To create IL programs, the "Enable IL" check box in the Options dialog box must be selected.
Refer to "7.5.2
Settings in IL Program".
● To delete a row, select the row and press the <Ctrl > key + <Delete> key simultaneously.
● Networks (circuits) can be commented out. The procedure for commenting out a network
(circuit) is the same as for LD programs.
Refer to "7.1.6 Commenting out a Network (Circuit)".
● The IL program can be converted and displayed as an LD or FBD program.
From the menu bar, select FBD/LD/IL>View and select a post-conversion programming
language.
7.5.2 Settings in IL Program
For IL programs, the following settings can be configured.
Open the Options window (by selecting T
ools>Options), select the "FBD, LD and IL editors"
category and specify settings in the "IL" tab window.
Type Item Description
View Enable IL Enables the use of IL programming language.
If this check box is cleared, IL will not be displayed in the list of
programming languages for setting objects when a new project is
created.
7.5 Programming in Instruction List (IL)
7-36 WUME-GM1RTXOP-01