9.3 Debug Operations
This section explains how to perform debug operations such as writing values and watch.
9.3.1 Writing Values and Forcibly Changing Values
Variable values for the GM1 controller can be changed. There are two methods for changing
values: W
riting values and forcibly changing values.
Writing values: Sets a value (to be changed later) only once. This value can then be changed
by the program.
Force Values: Sets a value to be changed in every cycle and maintains the value.
For example, use the following procedure to change the value of Boolean variable "x1" from
FALSE to TRUE by writing the value.
1. In the implementation section, double-click the element whose value is to be changed.
A new value will be preset.
Y
ou can also preset a value by clicking a cell in the "Preset value" column of the declaration
section.
2. From the menu bar
, select Debug>Write Values, or press the <Ctrl> key + <F7> key
simultaneously.
The preset value will be written.
9.3 Debug Operations
9-10 WUME-GM1RTXOP-01
To Next Page
Loading...
