Panasonic GM1 - Setting up the SFC Editor

7.3.4 Setting up the SFC Editor
For SFC editor elements, you can change step specifications, fonts, and other settings.
From the menu bar
, select Tools>Options to open the "Options" dialog box.
In the "Options" dialog box, select the "SFC editor" category and change the settings.
Layout
Item name Default value Function
Elements
Step height 2
Sets the height of a step.
Setting range: 1 to 100 matrix units
(Note 1)
Step width 6
Sets the width of a step.
Setting range: 2 to 100 matrix units
(Note 1)
Action width 6
Sets the width of an action.
Setting range: 2 to 100 matrix units
(Note 1)
Qualifier width 3
Sets the width of a qualifier.
Setting range: 2 to 100 matrix units
(Note 1)
Property width 6 Sets the width of a property.
7.3 Programming in Sequential Function Chart (SFC)
WUME-GM1RTXOP-01 7-23