Panasonic GM1 - Simulation Function for Offline Operation

10.1 Simulation Function
Simulation mode allows the user to perform a login operation without connecting to the GM1
controller
. It also allows the user to check behaviors in the same way as if the user logged in.
1. From the menu bar
, select Online>Simulation.
Simulation mode will be invoked and "Simulation" will be displayed on the status bar.
2. From the menu bar, select Online>Login, or press the <Alt> key and the <F8> key
simultaneously.
Login will occur in simulation mode. When login occurs in simulation mode, the device
object is displayed in italic.
Simulation will start.
● is displayed in front of the object of a device that is operated in simulation mode.
10.1 Simulation Function
10-2 WUME-GM1RTXOP-01