Panasonic GM1 - I;O Mapping for PWM Output

3. If necessary
, change Y4 to Y7 in "Output port configuration" to PWM(Ch0_PWM_Output) to
PWM(Ch3_PWM_Output), respectively.
12.5.3 I/O Mapping for PWM Output
The high-speed counter function is controlled by user programs.
■
InputArea (input area)
Channel Type Description Remarks
PwmStatusRegister WORD Input area -
■
PwmStatusRegister (PWM status register)
Channel Type Description Remarks
Ch*_PwmStatus BOOL
Ch* PWM output
status
Indicates the PWM output state.
F
ALSE: OFF
TRUE: ON
12.5 PWM Output
12-10 WUME-GM1RTXOP-01