13.4.6 EtherNet/IP Adapter Function
The EtherNet/IP adapter function allows the GM1 controller to communicate with EtherNet/IP
scanner devices.
13.4.7 Setting up the EtherNet/IP Adapter Function
This section explains how to set up the EtherNet/IP adapter function.
Adding devices
Add a local adapter device and module device to the Device tree, as described below.
1. Add a local adapter device.
A local adapter device serves as a connection point to which the scanner device connects.
1-1 Right-click the "LANPort2
" object in the navigator pane and then select "Add
Device" from the context-sensitive menu that is displayed.
The "Add Device" dialog box will be displayed.
1-2 Select "EtherNet_IP_Adapter" and click the [Add Device] button.
13.4 EtherNet/IP
WUME-GM1RTXOP-01 13-51
To Next Page
Loading...
