Panasonic GM1 - Editing Settings Without Connecting to the GM1 Controller

5. Click the [Scan Network
] button, select the GM1 Controller, and click the [OK] button.
The main pane will be displayed.
15.6.3 Editing Settings without Connecting to the GM1 Controller
You can freely edit parameters and other data saved in files without connecting to the GM1
Controller. The edited contents are not written to the servo amplifier.
1. Start P
ANATERM Lite for GM.
The "Connect" dialog box will be displayed.
2. Select "No communication
" and click the [OK] button.
The "Select Series" dialog box will be displayed.
15.6 Selecting the Device to Connect
WUME-GM1RTXOP-01 15-21