Panasonic GM1 - Counter Parameter Setting Items

Set/reset patterns for comparison function (target value match comparison)
comparison data
External output function
Capture function
● You can copy the parameter set in a counter. To do so, select a channel (Ch0 or Ch1) in the
"Category Selection" column and click the
[Copy] button.
Next, select another counter and click the [Paste] button.
● For details on each parameter, refer to "12.6.3 Counter Parameter Setting Items".
12.6.3 Counter Parameter Setting Items
■
Count function (Settable for each counter)
Setting item Settings Default value
Counter type Linear counter / Ring counter Linear counter
Enable/Disable overflow/
underflow
Disable / Enable Disable
12.6 High-speed Counter Function
12-22 WUME-GM1RTXOP-01