Panasonic GM1 - Display Language Setting Function

Category name Function Reference page
FBD, LD and IL editor
Allows the user to configure settings related to editing,
commenting, and printing FBD, LD, and IL programs.
"P.7-11"
"P.7-32"
SFC editor
Allows the user to configure settings related to the
sizes and fonts of SFC editor elements, the behavior at
the time of action element insertion, the display of
embedded objects in the navigator pane, the display of
properties, stepwise execution time during online
operation, and other items.
"P.7-23"
SmartCoding
Allows the user to configure settings related to the
functions for supporting program creation, such as
Input Assistant.
"P.7-15"
"P
.6-5"
"P.7-51"
Text editor
Allows the user to configure settings related to program
editing and inline monitoring.
"P.9-15"
Device editor
Allows the user to configure settings related to displays
for the device editor
.
-
Debugging
Allows the user to configure settings regarding whether
to restore breakpoints after resetting.
-
Monitoring Allows the user to configure settings related to displays
for monitoring.
-
Refactoring
Allows the user to configure settings for the valid range
of refactoring.
"P.7-52"
Load and save
Allows the user to configure settings regarding whether
to enable backup and auto saving of project files.
"P.4-24"
"P
.4-26"
International Settings
Allows the user to set a display language for GM
Programmer and P
ANATERM Lite for GM, as well as a
display language for the manual.
"P.3-33"
Declaration Editor
Allows the user to configure settings related to the
display format (text format or table format) for the
declaration section.
"P.6-3"
2. Select a desired category from the Categories pane.
The setting items for the selected category will be displayed in the setting pane.
3. Change the setting items as appropriate and click the [OK] button.
The setting items will be applied.
3.7.2 Display Language Setting Function
This function allows the user to change the display language setting for GM Programmer.
The default setting is the same language as the one used in the operating system. If you want
to use a dif
ferent language from the one used in the operating system, change the display
language setting. After you change the language setting, you must restart GM Programmer.
1. From the menu bar
, select Tools>Options.
3.7 Other Functions
WUME-GM1RTXOP-01 3-33