Panasonic GM1 - Navigator Pane

Name Icon Function
Insert Jump Inserts a jump in the specified position.
Insert label
Inserts a label in the selected network.
Insert Return Inserts a return value in the specified position.
Insert Input Adds an input to the specified box.
Negation
Adds a negation to the selected element.
Edge Detection
Adds an edge detection (rising edge detection) to the
selected element.
Set/Reset Converts the selected coil to a set coil or reset coil.
Set output connection
Converts box output to forwarding box output.
Insert Branch Inserts a branch on the right side of the selected contact.
Insert Branch below Inserts a new branch below the selected branch.
Insert Branch above Inserts a new branch above the selected branch.
Set Branch Start/End Point
Sets the selected line as the branch starting point.
3.4.3 Navigator Pane
The navigator pane displays the following tree:
3.4 Component Names
WUME-GM1RTXOP-01 3-21