Panasonic GM1 - The Monitor Window Does Not Behave Normally; The Alarm Window Does Not Behave Normally

15.12.7 The Monitor Window Does Not Behave Normally
Symptom Solution
Monitor display does not change
● There is a possibility that communication with the servo amplifier
has been disrupted and the PC is in an of
fline state. Check the
connection status of the servo amplifier.
15.12.8 The Alarm Window Does Not Behave Normally
Symptom Action method
Error histories are not displayed
● If no error has occurred before or error histories have been
cleared, error histories are not displayed.
●
Supplementary information about errors is displayed only when
the most recent, the second most recent, or the third most recent
error history is selected. Select an error history number again.
● Errors that are not recorded in error histories are not displayed in
error histories even if they occur.
15.12 Troubleshooting for Servo Amplifiers and Motors
15-44 WUME-GM1RTXOP-01