● You can copy the parameter set in a channel. To do so, select a channel (CH0 or CH1) in the
"Category Selection" column and click the
[Copy] button. Next, select another channel and click
the [Paste] button.
5.4.2 Adding Expansion Units
This section explains how to add device objects for expansion units to a project and set them
up.
For example, use the following procedure to add a digital input unit (product number:
AGM1X64D2) to Empty1.
1. Right-click the
[Empty1] object in the navigator pane and then select "Unit Management"
from the context-sensitive menu that is displayed.
5.4 Setting up Unit Control
WUME-GM1RTXOP-01 5-15
To Next Page
Loading...
