Panasonic GM1 - Setting up Unit Control; Setting up General-Purpose I;O, PWM Output, and High-Speed Counter for GM1 Controller

5.4 Setting up Unit Control
5.4.1 Setting up General-purpose I/O, PWM Output, and High-speed Counter
for GM1 Controller
This section explains how to set up general-purpose I/O, PWM output, and high-speed counter
for the GM1 Controller
.
The object of each unit is shown below.
● For details on general-purpose I/O, refer to "
12.4 General-purpose I/O".
● For details on PMW output, refer to "12.5 PWM Output".
● For details on the high-speed counter function, refer to "12.6 High-speed Counter Function".
For example, use the following procedure to set up a high-speed counter.
1. In the navigator pane, double-click the
[Counter_Configuration] object.
The high-speed counter setting window will be displayed.
5.4 Setting up Unit Control
WUME-GM1RTXOP-01 5-13