Panasonic GM1 - Login, Logout, and Download Procedures

8.8 Login / Logout
GM Programmer allows the user to log in to the GM1 controller
.
● During login, the application and source code generated by code generation are
downloaded to the GM1 controller
.
● The combination of the application and source code downloaded to the GM1 controller differs
according to the operations shown in the table below
.
○: Downloaded
×: Not downloaded
Operation Boot application Source code
Login ○ ○
Initial download ○ ○
Downloading after changing the
program
"Update boot project
" check box:
Selected
○ ○
Downloading after changing the
program
"Update boot project
" check box:
Cleared
× ×
Downloading after changing the
project
○ ○
Online change
"Update boot project
" check box:
Selected
○ ○
Online change
"Update boot project
" check box:
Cleared
× ×
Generating a boot application ○ ○
After logging in to the GM1 controller, you can perform debug operations such as starting or
stopping the GM1 controller.
8.8.1 Login
GM Programmer allows the user to log in to the GM1 Controller. When "Login" is executed,
applications are downloaded to the GM1 Controller
.
1. From the menu bar
, select Online>Login, or press the <Alt> key and the <F8> key
simultaneously.
A confirmation message will be displayed, asking whether to download the applications to
the GM1 controller (device).
8.8 Login / Logout
8-20 WUME-GM1RTXOP-01