● Since the error resolution method varies depending on the error, refer to "9.9.5 Error Code
List".
9.9.3 Obtaining Error Information Using User Programs
The following function block can be used to obtain error information for the GM1 controller.
●
SYS_SysGetSystemError
This function block is used to obtain error information for the GM1 controller from external
devices such as display units.
1. Define the variables to be used in the SYS_SysGetSystemError function block, as global
variables.
2. Select "T
ask Configuration" and then the "System Events" tab, and register the function to
be executed when a particular event occurs.
9.9 Error Notification Function
WUME-GM1RTXOP-01 9-37
To Next Page
Loading...
