sensitivity=1 are set, a watchdog timer error will occur in cycle n+1, causing the program to
stop.
9.8.2 Performance Check Based on Device Trace
The GM1 controller allows multiple tasks to run. However, use the GM1 controller so that the
CPU load factor (processing load of all tasks) is no more than 80%. The CPU load factor can be
checked using the
"Device Trace" function.
1. Right-click the
[Device] object in the navigator pane and then select Add
Object>DeviceTrace from the context-sensitive object that is displayed.
The "Add DeviceTrace" dialog box will be displayed.
9.8 Checking the Performance of GM1 Controller
9-34 WUME-GM1RTXOP-01
To Next Page
Loading...
