8.10.2 Conducting Commissioning for Servo Amplifiers
While in the online config mode, you can conduct commissioning for servo amplifiers.
There is no need to create a program for commissioning.
The following is an example of commissioning using the A6N-series servo amplifiers.
1. Double-click the servo amplifier object in the navigator pane.
The "RTEX Axis Setting" dialog box will be displayed.
2. Click the
"Commissioning" tab.
The Commissioning screen will be displayed.
8.10 Commissioning
8-30 WUME-GM1RTXOP-01
To Next Page
Loading...
