Panasonic GM1 - Automatically Saving Project Files

4.11 Automatically Saving Project Files
Project files can be saved automatically during editing. Even if data disappears when GM
Programmer terminates abnormally
, a file up to the point in time when it was saved
automatically can be restored. The extension of backup files is ".autosave".
1. From the menu bar
, select Tools>Options.
The "Options" dialog box will be displayed.
2. Select the "Load and Save" category.
The "Load and Save" pane will be displayed.
3. Select the "Automatically save evey
" check box and click the [OK] button.
The automatic save interval can be changed in minutes (default value: 10 minutes).
4.11 Automatically Saving Project Files
4-26 WUME-GM1RTXOP-01