1. When executing "login", select "Login without any change" and click the [OK] button.
Applications will not be downloaded to the GM1 controller.
2. From the menu bar
, select Online>Download.
A confirmation message will be displayed, asking whether to download the source code to
the GM1 controller.
3. Click
[Yes].
If the project has not yet been saved, a confirmation message will be displayed, asking
whether to save the project.
4. If you do not save the project, the source code will not be downloaded. In this case, click
the [Yes] button.
● To delete the downloaded source code from the GM1 controller, execute "Reset Device". For
details on reset, refer to "9.5.1 Reset W
arm, Reset Cold, and Reset Origin".
8.8 Login / Logout
8-22 WUME-GM1RTXOP-01
To Next Page
Loading...
