Step Description Reference
9 Set up the GM1 Controller in GM Programmer.
9-1 Make time setting. "P.8-12"
9-2 Log in to the GM1 Controller. "P.8-20"
9-3 Log out from the GM1 Controller. "P.8-21"
9-4 Upload the source. "P.8-27"
10 Configure security settings with GM Programmer. "P.10-3"
10-1 Configure user management settings. "P.10-4"
10-2 Configure encryption and signature settings. "P.10-16"
10-3 Configure write-protection settings. "P.10-25"
2.2 Work Flowchart
WUME-GM1RTXOP-01 2-5
To Next Page
Loading...
