2. Enter the "cert-getapplist
" command in the input field.
All certificates that are used will be displayed.
3. Enter the "cert-genselfsigned 1
" command in the input field.
Create a certificate for ComponentName "CmpSecureChannel".
4. Open the "Log" tab of the device editor and click the [Update Information] button.
Check whether a certificate has been created.
5. In the device editor
, open the "PLC Shell" tab and enter the "cert-getapplist" command in
the input field.
Check whether a certificate has been created for ComponentName "CmpSecureChannel".
6. Open the device editor and select the
"Communication Settings" tab.
10.4 Security Function: Encryption
WUME-GM1RTXOP-01 10-21
To Next Page
Loading...
