2. Enter a cam table name in the
"Name" field and then click the [Add] button.
A cam table object will be added.
The entered cam table name will be used when you specify a cam table with a function
block.
The ""Cam" tab displays position, velocity, acceleration, and jerk graphs.
The horizontal axis represents the master axis and the vertical axis represents the slave
axis.
The "Cam table" tab displays numerical values that represent the graphs displayed in the
"Cam" tab.
11.4 Synchronous Operation
WUME-GM1RTXOP-01 11-41
To Next Page
Loading...
