Setting item Description
Name Settings Specify a name for a CNC table to be created.
Imple
mentat
ion
Din66025
[Recommended]
A CNC table is created using G-code.
Table
[Not supported]
A CNC table is created in simple table input format. Because this item is not
supported by the GM1 controller
, select "Din66025".
Compi
le
mode
SMC_CNC_REF
[Recommended]
All interpolation control functions of the GM1 controller can be used.
SMC_OUTQUEUE
[Not recommended]
Movement speed is improved, but changing the settings in CNC tables,
joining CNC tables, and other similar operations cannot be performed.
File
[Not supported]
CNC tables are saved as external reference files. Because this mode is not
supported by the GM1 controller
, do not select.
"CNC settings" and "CNC Program" will be created in the Device tree. "CNC Program" is
displayed as the name registered earlier ("CNC_Sample").
11.5 Multi-axis Operation
WUME-GM1RTXOP-01 11-53
To Next Page
Loading...
