Build
Item Function
Build Verifies the syntax of objects.
Rebuild Verifies the syntax of all objects again.
Generate code Generates application codes.
Clean Deletes application build information.
Clean all Deletes all application build information in the same way as "Clean".
Online
Item Function
Add USB Port Adds a USB port as a communication interface.
Login
Downloads the applications generated by code generation to the
GM1 controller at the time of login.
Logout Logs out from the device to which the user logged in.
Download Downloads a program while the user is logged in.
Online Change
Allows the user to change applications without having to stop the
GM1 controller during operation.
Status
Allows the user to check any errors that are currently occurring in
the GM1 controller
.
System Data History
Allows the user to check any errors that occurred in the GM1
controller
.
Reset Warm
Initializes variables other than the RETAIN and PERSISTENT
variables.
Reset Cold Initializes variables other than the PERSISTENT variable.
Reset Origin
Initializes all variables. Removes active applications from the GM1
controller
.
Simulation
Allows the user to perform a login operation without connecting to
the GM1 controller and check behaviors in the same way as if the
user logged in.
Security
Allows the user to configure user management, project encryption,
and other settings.
Item Function
Logoff Current
Device User
Logs off the users who are logged in to the
device.
Add Device User Adds users who can log in to the device.
Change Password
Device User
Changes the passwords of users who are
logged in to the device.
Remove Device
User
Removes users who can log in to the device.
Operation Mode
Allows the user to prevent some debug operations from being
executed.
3.4 Component Names
WUME-GM1RTXOP-01 3-15
To Next Page
Loading...
