● Before executing "build", check the confirmation items and notes in the following sections.
■
Confirmation items during programming
T
o ensure normal operation, check the following items.
● Dynamical analysis for CNC table
CNC tables that have been created can be subject to dynamical analysis to preliminarily
check how each axis moves.
• Verification method for dynamical analysis
1. In the CNC table editing window, from the menu bar, select CNC>Analyze Dynamics.
2. The "Dynamical Analysis" window will be displayed. Specify appropriate settings in the
"Axis", "Cycle time", "V
elocity mode", and "Maximum jerk" fields.
11.5 Multi-axis Operation
WUME-GM1RTXOP-01 11-79
To Next Page
Loading...
